The EGU2010 SM1.3 Seismic Centers Data Acquisition session: an introduction to Antelope, EarthWorm and SeisComP, and their use around the World
Main Article Content
Abstract
Session «SM1.3 - Seismic Centers Data Acquisition» was part of the General Assembly 2010 of the European Geosciences Union (EGU) that took place in Vienna (Austria) from 2-7 May, 2010. This session was organized to present both the differences and similarities in the operations of different types of seismic data centers, to share the experiences and to stimulate constructive discussion. There are only a few, widely used, "all-in-one" data acquisition and processing packages available for seismic data centers, with two public-domain tools (SeisComP and EarthWorm) and one commercial tool (Antelope). The choice of any particular tool will depend on many different criteria, from operational aspects to scientific results, or on the availability of specific requirements in relation to a specific mission. The development of EarthWorm originally started in 1993 in the USA, and it was designed to replace the aging and vendor-tied, regional processing systems. Antelope, started around 1996, with the aim to have real-time data flow from field sensors to scientist. SeisComP also started in the nineties as a real-time data acquisition and processing system, and it evolved towards an early warning system for seismic observatories. Protocols have been established to exchange real-time waveform data between the different packages. In this introductory report, we outline the main characteristics of the three software packages for seismic data acquisition.
Article Details
How to Cite
Pesaresi, D. (2011) “The EGU2010 SM1.3 Seismic Centers Data Acquisition session: an introduction to Antelope, EarthWorm and SeisComP, and their use around the World”, Annals of Geophysics, 54(1), pp. 1–7. doi: 10.4401/ag-4972.
Issue
Section
OLD
Open-Access License
No Permission Required
Istituto Nazionale di Geofisica e Vulcanologia applies the Creative Commons Attribution License (CCAL) to all works we publish.
Under the CCAL, authors retain ownership of the copyright for their article, but authors allow anyone to download, reuse, reprint, modify, distribute, so long as the original authors and source are cited. No permission is required from the authors or the publishers.
In most cases, appropriate attribution can be provided by simply citing the original article.
If the item you plan to reuse is not part of a published article (e.g., a featured issue image), then please indicate the originator of the work, and the volume, issue, and date of the journal in which the item appeared. For any reuse or redistribution of a work, you must also make clear the license terms under which the work was published.
This broad license was developed to facilitate open access to, and free use of, original works of all types. Applying this standard license to your own work will ensure your right to make your work freely and openly available. For queries about the license, please contact ann.geophys@ingv.it.