Noise modelling and estimation of hyperspectral data from airborne imaging spectrometers

Main Article Content

B. Aiazzi
L. Alparone
A. Barducci
S. Baronti
P. Marcoionni
I. Pippi
M. Selva

Abstract

The definition of noise models suitable for hyperspectral data is slightly different depending on whether whiskbroom
or push-broom are dealt with. Focussing on the latter type (e.g., VIRS-200) the noise is intrinsically non-stationary
in the raw digital counts. After calibration, i.e. removing the variability effects due to different gains and offsets
of detectors, the noise will exhibit stationary statistics, at least spatially. Hence, separable 3D processes correlated
across track (x), along track (y) and in the wavelength (?), modelled as auto-regressive with GG statistics have
been found to be adequate. Estimation of model parameters from the true data is accomplished through robust techniques
relying on linear regressions calculated on scatter-plots of local statistics. An original procedure was devised
to detect areas within the scatter-plot corresponding to statistically homogeneous pixels. Results on VIRS-200 data
show that the noise is heavy-tailed (tails longer than those of a Gaussian PDF) and somewhat correlated along and
across track by slightly different extents. Spectral correlation has been investigated as well and found to depend both
on the sparseness (spectral sampling) and on the wavelength values of the bands that have been selected.

Article Details

How to Cite
Aiazzi, B., Alparone, L., Barducci, A., Baronti, S., Marcoionni, P., Pippi, I. and Selva, M. (2006) “Noise modelling and estimation of hyperspectral data from airborne imaging spectrometers”, Annals of Geophysics, 49(1). doi: 10.4401/ag-3141.
Section
OLD