3D dynamic simulations of spontaneous rupture propagation governed by different constitutive laws with rake rotation allowed
Main Article Content
Abstract
In this work we present a 3D Finite Difference numerical method to model the dynamic spontaneous propagation
of an earthquake rupture on planar faults in an elastic half-space. We implement the Traction-at-Split-Nodes
fault boundary condition for a system of faults, either vertical or oblique, using different constitutive laws. We
can adopt both a slip-weakening law to prescribe the traction evolution within the breakdown zone or rate- and
state-dependent friction laws, which involve the choice of an evolution relation for the state variable. Our numerical
procedure allows the use of oblique and heterogeneous distribution of initial stress and allows the rake
rotation. This implies that the two components of slip velocity and total dynamic traction are coupled together
to satisfy, in norm, the adopted constitutive law. The simulations presented in this study show that the rupture
acceleration to super-shear crack speeds occurs along the direction of the imposed initial stress; the rupture front
velocity along the perpendicular direction is slower than that along the pre-stress direction. Depending on the
position on the fault plane the orientation of instantaneous total dynamic traction can change with time with respect
to the imposed initial stress direction. These temporal rake rotations depend on the amplitude of initial
stress and on its distribution on the fault plane. They also depend on the curvature and direction of the rupture
front with respect to the imposed initial stress direction: this explains why rake rotations are mostly located near
the rupture front and within the cohesive zone.
of an earthquake rupture on planar faults in an elastic half-space. We implement the Traction-at-Split-Nodes
fault boundary condition for a system of faults, either vertical or oblique, using different constitutive laws. We
can adopt both a slip-weakening law to prescribe the traction evolution within the breakdown zone or rate- and
state-dependent friction laws, which involve the choice of an evolution relation for the state variable. Our numerical
procedure allows the use of oblique and heterogeneous distribution of initial stress and allows the rake
rotation. This implies that the two components of slip velocity and total dynamic traction are coupled together
to satisfy, in norm, the adopted constitutive law. The simulations presented in this study show that the rupture
acceleration to super-shear crack speeds occurs along the direction of the imposed initial stress; the rupture front
velocity along the perpendicular direction is slower than that along the pre-stress direction. Depending on the
position on the fault plane the orientation of instantaneous total dynamic traction can change with time with respect
to the imposed initial stress direction. These temporal rake rotations depend on the amplitude of initial
stress and on its distribution on the fault plane. They also depend on the curvature and direction of the rupture
front with respect to the imposed initial stress direction: this explains why rake rotations are mostly located near
the rupture front and within the cohesive zone.
Article Details
How to Cite
Bizzarri, A. and Cocco, M. (2005) “3D dynamic simulations of spontaneous rupture propagation governed by different constitutive laws with rake rotation allowed”, Annals of Geophysics, 48(2). doi: 10.4401/ag-3201.
Issue
Section
OLD
Open-Access License
No Permission Required
Istituto Nazionale di Geofisica e Vulcanologia applies the Creative Commons Attribution License (CCAL) to all works we publish.
Under the CCAL, authors retain ownership of the copyright for their article, but authors allow anyone to download, reuse, reprint, modify, distribute, so long as the original authors and source are cited. No permission is required from the authors or the publishers.
In most cases, appropriate attribution can be provided by simply citing the original article.
If the item you plan to reuse is not part of a published article (e.g., a featured issue image), then please indicate the originator of the work, and the volume, issue, and date of the journal in which the item appeared. For any reuse or redistribution of a work, you must also make clear the license terms under which the work was published.
This broad license was developed to facilitate open access to, and free use of, original works of all types. Applying this standard license to your own work will ensure your right to make your work freely and openly available. For queries about the license, please contact ann.geophys@ingv.it.