Local stresses, dyke arrest and surface deformation in volcanic edificesand rift zones
Main Article Content
Abstract
Field studies indicate that nearly all eruptions in volcanic edifices and rift zones are supplied with magma through
fractures (dykes) that are opened by magmatic overpressure. While (inferred) dyke injections are frequent during unrest
periods, volcanic eruptions are, in comparison, infrequent, suggesting that most dykes become arrested at certain
depths in the crust, in agreement with field studies. The frequency of dyke arrest can be partly explained by the numerical
models presented here which indicate that volcanic edifices and rift zones consisting of rocks of contrasting mechanical properties, such as soft pyroclastic layers and stiff lava flows, commonly develop local stress fields that encourage dyke arrest. During unrest, surface deformation studies are routinely used to infer the geometries of arrested dykes, and some models (using homogeneous, isotropic half-spaces) infer large grabens to be induced by such dykes. Our results, however, show that the dyke-tip tensile stresses are normally much greater than the induced surface stresses, making it difficult to explain how a dyke can induce surface stresses in excess of the tensile (or shear)
strength while the same strength is not exceeded at the (arrested) dyke tip. Also, arrested dyke tips in eroded or active
rift zones are normally not associated with dyke-induced grabens or normal faults, and some dykes arrested within a few metres of the surface do not generate faults or grabens. The numerical models show that abrupt changes in Young's moduli(stiffnesses), layers with relatively high dyke-normal compressive stresses (stress barriers), and weak horizontal contacts may make the dyke-induced surface tensile stresses too small for significant fault or graben formation to occur in rift zones or volcanic edifices. Also, these small surface stresses may have no simple relation to the dyke geometry or the depth to its tip. Thus, for a layered crust with weak contacts, straightforward inversion of
surface geodetic data may lead to unreliable geometries of arrested dykes in active rift zones and volcanic edifices.
fractures (dykes) that are opened by magmatic overpressure. While (inferred) dyke injections are frequent during unrest
periods, volcanic eruptions are, in comparison, infrequent, suggesting that most dykes become arrested at certain
depths in the crust, in agreement with field studies. The frequency of dyke arrest can be partly explained by the numerical
models presented here which indicate that volcanic edifices and rift zones consisting of rocks of contrasting mechanical properties, such as soft pyroclastic layers and stiff lava flows, commonly develop local stress fields that encourage dyke arrest. During unrest, surface deformation studies are routinely used to infer the geometries of arrested dykes, and some models (using homogeneous, isotropic half-spaces) infer large grabens to be induced by such dykes. Our results, however, show that the dyke-tip tensile stresses are normally much greater than the induced surface stresses, making it difficult to explain how a dyke can induce surface stresses in excess of the tensile (or shear)
strength while the same strength is not exceeded at the (arrested) dyke tip. Also, arrested dyke tips in eroded or active
rift zones are normally not associated with dyke-induced grabens or normal faults, and some dykes arrested within a few metres of the surface do not generate faults or grabens. The numerical models show that abrupt changes in Young's moduli(stiffnesses), layers with relatively high dyke-normal compressive stresses (stress barriers), and weak horizontal contacts may make the dyke-induced surface tensile stresses too small for significant fault or graben formation to occur in rift zones or volcanic edifices. Also, these small surface stresses may have no simple relation to the dyke geometry or the depth to its tip. Thus, for a layered crust with weak contacts, straightforward inversion of
surface geodetic data may lead to unreliable geometries of arrested dykes in active rift zones and volcanic edifices.
Article Details
How to Cite
Gudmundsson, A. and Brenner, L. S. (2004) “Local stresses, dyke arrest and surface deformation in volcanic edificesand rift zones”, Annals of Geophysics, 47(4). doi: 10.4401/ag-3352.
Issue
Section
OLD
Open-Access License
No Permission Required
Istituto Nazionale di Geofisica e Vulcanologia applies the Creative Commons Attribution License (CCAL) to all works we publish.
Under the CCAL, authors retain ownership of the copyright for their article, but authors allow anyone to download, reuse, reprint, modify, distribute, so long as the original authors and source are cited. No permission is required from the authors or the publishers.
In most cases, appropriate attribution can be provided by simply citing the original article.
If the item you plan to reuse is not part of a published article (e.g., a featured issue image), then please indicate the originator of the work, and the volume, issue, and date of the journal in which the item appeared. For any reuse or redistribution of a work, you must also make clear the license terms under which the work was published.
This broad license was developed to facilitate open access to, and free use of, original works of all types. Applying this standard license to your own work will ensure your right to make your work freely and openly available. For queries about the license, please contact ann.geophys@ingv.it.