Aerosol optical thickness of Mt. Etna volcanic plume retrieved by means of the Airborne Multispectral Imaging Spectrometer (MIVIS)
Main Article Content
Abstract
Within the framework of the European MVRRS project (Mitigation of Volcanic Risk by Remote Sensing
Techniques), in June 1997 an airborne campaign was organised on Mt. Etna to study different characteristics of
the volcanic plume emitted by the summit craters in quiescent conditions. Digital images were collected with
the Airborne Multispectral Imaging Spectrometer (MIVIS), together with ground-based measurements. MIVIS
images were used to calculate the aerosol optical thickness of the volcanic plume. For this purpose, an inversion
algorithm was developed based on radiative transfer equations and applied to the upwelling radiance data measured
by the sensor. This article presents the preliminary results from this inversion method. One image was selected
following the criteria of concomitant atmospheric ground-based measurements necessary to model the atmosphere,
plume centrality in the scene to analyse the largest plume area and cloudless conditions. The selected image was
calibrated in radiance and geometrically corrected. The 6S (Second Simulation of the Satellite Signal in the Solar
Spectrum) radiative transfer model was used to invert the radiative transfer equation and derive the aerosol optical
thickness. The inversion procedure takes into account both the spectral albedo of the surface under the plume and
the topographic effects on the refl ected radiance, due to the surface orientation and elevation. The result of the
inversion procedure is the spatial distribution of the plume optical depth. An average value of 0.1 in the wavelength
range 454-474 nm was found for the selected measurement day.
Techniques), in June 1997 an airborne campaign was organised on Mt. Etna to study different characteristics of
the volcanic plume emitted by the summit craters in quiescent conditions. Digital images were collected with
the Airborne Multispectral Imaging Spectrometer (MIVIS), together with ground-based measurements. MIVIS
images were used to calculate the aerosol optical thickness of the volcanic plume. For this purpose, an inversion
algorithm was developed based on radiative transfer equations and applied to the upwelling radiance data measured
by the sensor. This article presents the preliminary results from this inversion method. One image was selected
following the criteria of concomitant atmospheric ground-based measurements necessary to model the atmosphere,
plume centrality in the scene to analyse the largest plume area and cloudless conditions. The selected image was
calibrated in radiance and geometrically corrected. The 6S (Second Simulation of the Satellite Signal in the Solar
Spectrum) radiative transfer model was used to invert the radiative transfer equation and derive the aerosol optical
thickness. The inversion procedure takes into account both the spectral albedo of the surface under the plume and
the topographic effects on the refl ected radiance, due to the surface orientation and elevation. The result of the
inversion procedure is the spatial distribution of the plume optical depth. An average value of 0.1 in the wavelength
range 454-474 nm was found for the selected measurement day.
Article Details
How to Cite
Spinetti, C., Buongiorno, M. F., Lombardo, V. and Merucci, L. (2003) “Aerosol optical thickness of Mt. Etna volcanic plume retrieved by means of the Airborne Multispectral Imaging Spectrometer (MIVIS)”, Annals of Geophysics, 46(2). doi: 10.4401/ag-3417.
Issue
Section
OLD
Open-Access License
No Permission Required
Istituto Nazionale di Geofisica e Vulcanologia applies the Creative Commons Attribution License (CCAL) to all works we publish.
Under the CCAL, authors retain ownership of the copyright for their article, but authors allow anyone to download, reuse, reprint, modify, distribute, so long as the original authors and source are cited. No permission is required from the authors or the publishers.
In most cases, appropriate attribution can be provided by simply citing the original article.
If the item you plan to reuse is not part of a published article (e.g., a featured issue image), then please indicate the originator of the work, and the volume, issue, and date of the journal in which the item appeared. For any reuse or redistribution of a work, you must also make clear the license terms under which the work was published.
This broad license was developed to facilitate open access to, and free use of, original works of all types. Applying this standard license to your own work will ensure your right to make your work freely and openly available. For queries about the license, please contact ann.geophys@ingv.it.