The impact of a and b value uncertainty on loss estimation in the reinsurance industry
Main Article Content
Abstract
In the reinsurance industry different probabilistic models are currently used for seismic risk analysis. A credible loss estimation of the insured values depends on seismic hazard analysis and on the vulnerability functions of the given structures. Besides attenuation and local soil amplification, the earthquake occurrence model (often represented by the Gutenberg and Richter relation) is a key element in the analysis. However, earthquake catalogues are usually incomplete, the time of observation is too short and the data themselves contain errors. Therefore, a and b values can only be estimated with uncertainties. The knowledge of their variation provides a valuable input for earthquake risk analysis, because they allow the probability distribution of expected losses (expressed by Average Annual Loss (AAL)) to be modelled. The variations of a and b have a direct effect on the estimated exceeding probability and consequently on the calculated loss level. This effect is best illustrated by exceeding probability versus loss level and AAL versus magnitude graphs. The sensitivity of average annual losses due to different a to b ratios and magnitudes is obvious. The estimation of the variation of a and b and the quantification of the sensitivity of calculated losses are fundamental for optimal earthquake risk management. Ignoring these uncertainties means that risk management decisions neglect possible variations of the earthquake loss estimations.
Article Details
How to Cite
Liechti, D., Ruettener, E., Eugster, S. and Streit, R. (2000) “The impact of a and b value uncertainty on loss estimation in the reinsurance industry”, Annals of Geophysics, 43(1). doi: 10.4401/ag-3619.
Issue
Section
OLD
Open-Access License
No Permission Required
Istituto Nazionale di Geofisica e Vulcanologia applies the Creative Commons Attribution License (CCAL) to all works we publish.
Under the CCAL, authors retain ownership of the copyright for their article, but authors allow anyone to download, reuse, reprint, modify, distribute, so long as the original authors and source are cited. No permission is required from the authors or the publishers.
In most cases, appropriate attribution can be provided by simply citing the original article.
If the item you plan to reuse is not part of a published article (e.g., a featured issue image), then please indicate the originator of the work, and the volume, issue, and date of the journal in which the item appeared. For any reuse or redistribution of a work, you must also make clear the license terms under which the work was published.
This broad license was developed to facilitate open access to, and free use of, original works of all types. Applying this standard license to your own work will ensure your right to make your work freely and openly available. For queries about the license, please contact ann.geophys@ingv.it.