Accurate determination of phase arrival times using autoregressive likelihood estimation
Main Article Content
Abstract
We have investigated the potential automatic use of an onset picker based on autoregressive likelihood estimation. Both a single component version and a three component version of this method have been tested on data from events located in the Khibiny Massif of the Kola peninsula, recorded at the Apatity array, the Apatity three component station and the ARCESS array. Using this method, we have been able to estimate onset times to an accuracy (standard deviation) of about 0.05 s for P-phases and 0.15 0.20 s for S phases. These accuracies are as good as for analyst picks, and are considerably better than the accuracies of the current onset procedure used for processing of regional array data at NORSAR. In another application, we have developed a generic procedure to reestimate the onsets of all types of first arriving P phases. By again applying the autoregressive likelihood technique, we have obtained automatic onset times of a quality such that 70% of the automatic picks are within 0.1 s of the best manual pick. For the onset time procedure currently used at NORSAR, the corresponding number is 28%. Clearly, automatic reestimation of first arriving P onsets using the autoregressive likelihood technique has the potential of significantly reducing the retiming efforts of the analyst.
Article Details
How to Cite
Kvaerna, G. (1994) “Accurate determination of phase arrival times using autoregressive likelihood estimation”, Annals of Geophysics, 37(3). doi: 10.4401/ag-4207.
Issue
Section
OLD
Open-Access License
No Permission Required
Istituto Nazionale di Geofisica e Vulcanologia applies the Creative Commons Attribution License (CCAL) to all works we publish.
Under the CCAL, authors retain ownership of the copyright for their article, but authors allow anyone to download, reuse, reprint, modify, distribute, so long as the original authors and source are cited. No permission is required from the authors or the publishers.
In most cases, appropriate attribution can be provided by simply citing the original article.
If the item you plan to reuse is not part of a published article (e.g., a featured issue image), then please indicate the originator of the work, and the volume, issue, and date of the journal in which the item appeared. For any reuse or redistribution of a work, you must also make clear the license terms under which the work was published.
This broad license was developed to facilitate open access to, and free use of, original works of all types. Applying this standard license to your own work will ensure your right to make your work freely and openly available. For queries about the license, please contact ann.geophys@ingv.it.