ShakeMaps during the Emilia sequence

Valentino Lauciani, Licia Faenza, Alberto Michelini

Abstract


ShakeMap is a software package that can be used to generate maps of ground shaking for various peak ground motion (PGM) parameters, including peak ground acceleration (PGA), peak ground velocity, and spectral acceleration response at 0.3 s, 1.0 s and 3.0 s, and instrumentally derived intensities. ShakeMap has been implemented in Italy at the Istituto Nazionale di Geofisica e Vulcanologia (INGV; National Institute of Geophysics and Volcanology) since 2006 (http://shakemap.rm.ingv.it), with the primary aim being to help the Dipartimento della Protezione Civile (DPC; Civil Protection Department) civil defense agency in the definition of rapid and accurate information on where earthquake damage is located, to correctly direct rescue teams and to organize emergency responses. Based on the ShakeMap software package [Wald et al. 1999, Worden et al. 2010], which was developed by the U.S. Geological Survey (USGS), the INGV is constructing shake maps for Ml ≥3.0, with the adoption of a fully automatic procedure based on manually revised locations and magnitudes [Michelini et al. 2008]. The focus of this study is the description of the progressive generation of these shake maps for the sequence that struck the Emilia-Romagna Region in May 2012. […]



Keywords


Ground motion; Surveys, measurements and monitoring; Interments and techniques; Seismological data

Full Text:

PDF

References


DOI: https://doi.org/10.4401/ag-6160

Published by INGV, Istituto Nazionale di Geofisica e Vulcanologia - ISSN: 2037-416X