Ulteri considerazioni sulla correzione topografica nei rilievi gravimelrici geominerari
Main Article Content
Abstract
In t h e present paper we are dealing with residual error
occurring when considering surfaces of cylindrical compartment in gravimetric
topographic correction, horizontal.
I t is shown how residual error variations in a compartment depend
on the average level, average slope and slope o r i e n t a t i o n of topographic
surface in t h e compartment.
The residual error of a zone or a n ensemble of zones may be positive
or negative according to s t a t i s t i c a l distribution of slope orientations. As
a n example, the results of a gravimetric survey are related.
Rapid methods to value t h e residual error and to eliminate it in some
cases are suggested.
occurring when considering surfaces of cylindrical compartment in gravimetric
topographic correction, horizontal.
I t is shown how residual error variations in a compartment depend
on the average level, average slope and slope o r i e n t a t i o n of topographic
surface in t h e compartment.
The residual error of a zone or a n ensemble of zones may be positive
or negative according to s t a t i s t i c a l distribution of slope orientations. As
a n example, the results of a gravimetric survey are related.
Rapid methods to value t h e residual error and to eliminate it in some
cases are suggested.
Article Details
How to Cite
BERNABINI, M. (1964) “Ulteri considerazioni sulla correzione topografica nei rilievi gravimelrici geominerari”, Annals of Geophysics, 17(2), pp. 285–310. doi: 10.4401/ag-5210.
Issue
Section
OLD
Open-Access License
No Permission Required
Istituto Nazionale di Geofisica e Vulcanologia applies the Creative Commons Attribution License (CCAL) to all works we publish.
Under the CCAL, authors retain ownership of the copyright for their article, but authors allow anyone to download, reuse, reprint, modify, distribute, so long as the original authors and source are cited. No permission is required from the authors or the publishers.
In most cases, appropriate attribution can be provided by simply citing the original article.
If the item you plan to reuse is not part of a published article (e.g., a featured issue image), then please indicate the originator of the work, and the volume, issue, and date of the journal in which the item appeared. For any reuse or redistribution of a work, you must also make clear the license terms under which the work was published.
This broad license was developed to facilitate open access to, and free use of, original works of all types. Applying this standard license to your own work will ensure your right to make your work freely and openly available. For queries about the license, please contact ann.geophys@ingv.it.